Thông số về máy dò lỗ hàn WHD Weld Hole Detector

WHDWeld Hole Detector

Slitting and continuous coil galvanizing plants cannot afford to miss locating a weld seam while processing coils – Logika’s Weld Hole Detector will locate and signal the position of any weld marking hole. This system can prevent a coiling/uncoiling breakout as well as lower scrap costs by clearly locating where coil welds are to be removed. The integrated output relay can be programmed to maintain an alarm signal for up to 4 seconds allowing the operator to slow the line down for shearing. This system uses IR technology at a modulated frequency that cannot be mistaken for other light sources eliminating false detections.

Specifications

• Power input:  24VDC±10% , 110VAC ±10%, 220VAC ±10% @ 20 VA
• Output : Relay contact (1NO,1NC) Contacts AC250V 5A; DC 30V 5A
• Output : PNP output maximum current 100mA with overload protection
• Response Time: ≤1ms
• Maximum Sheet Speed: 900 m/min (2950 feet/min)
• Working Distance: 1.2m (48 inches) – 3m (118 inches)
• Housing: Hermetically sealed cast aluminum enclosure rated IP65
• Dimensions: Emitter Unit: 60cm x 43cm x 21cm (23.62” x 16.92” x 8.26”)
• Dimensions: Receiver Unit: 60cm x 43cm x 21cm (23.62” x 16.92” x 8.26”)
• Weight: 10 kg total (22lbs)

Features

• Easy installation with included mounting hardware
• LED indicator: Green = “power on” / Red = “detection”
• Optional junction box

Downloads

• Weld Hole Detector manual rev 1.1

Máy dò lỗ hàn Logika WHD Weld Hole Detector